Home > HARDWARE > WINDOW & DOOR HARDWARE > PATIO DOOR HARDWARE
Choose a sub category:
LATCHES / HANDLES PATIO DOOR REPAIR PARTS
Sort By:
1
Prime Line A 127 Door Latch Prime Line B551 Bottom Mount Sliding Door Roller Assembly Prime Line A 111 Door Latch/Pull
Used by several patio door manufacturers. Screw slots allow for vertical adjustments. 7/32"W x 1-3/16"H (not including strike hook). Includes 2 diecast strikes and installation screws. Plastic roller with narrow center groove 7/32"W nylon wheel, concave edge. Includes a 8-32 x 3/8" machine screw with binder post nut. Fits on Air Control doors. Non-handed, surface mount, economy pulls, plastic assembly. Contents: 1 black inside pull, 1 black outside pull, #4 8x3/8" Phillips flat head sheet metal screws. 1-7/8"W x 4"H.
Prime Line B 521 Concave Edge Spring Tension Roller Assembly Prime Line B 639 Concave Edge Spring Tension Roller Assembly Prime Line B515 Sliding Spring Tension Door Roller Assembly
1/4"W center groove nylon wheel, high tension 2-1/2"L heat-treated steel spring, and No.8 x 3/8" Phillips pan head sheet metal screw. Used by Metal Industries. Center grooved, 1/4"W, roller. 1-3/4"L, high-tension, heat-treated steel spring. Includes No.8 x 3/8" Phillips sheet metal screw. Used as top and bottom roller by several patio door manufacturers. Consists of 1/4"W center groove nylon wheel, 2"L x 3/8"W steel housing, high-tension heat-treated steel spring.
Prime Line A 151 Door Latch/Pull Prime Line A 142 Cross Latch and Pull ROLLER DR SCRN WHT METAL 2/PK
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet, and installation screws. 2-1/8"W x 4-1/4"H handles, 3-5/8" CTC. Non-handed; mortise installation; used by several door manufacturers. Includes 1 plastic inside and outside pull, 1 steel latch assembly, 1 plastic activator, 1 pop rivet, and installation screws. Bent spring design used by Academy Mfg. and others. Center grooved 5/16"W wheel, 2-1/4"L x 5/16"W flat high-tension heat-treated steel spring, and No.8 x 3/8" Phillips sheet metal screw.
Prime Line D 1502 Concave Edge Center Grooved Roller Assembly Prime Line E 2014 Mortise Lock Prime Line D 1607 Concave Edge Adjustable Roller Assembly
For sliding glass doors. Center grooved, 5/16"W steel ball bearing roller and steel inner race with 1/4"-20 x 3/4" carriage bolt and 1/4"-20 hex nut. Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole Center: 3-11/16". 2-roller tandem design. 6-1/4"L x 1-3/16"H x 11/16"D adjustable steel housing with 2 steel ball bearing rollers.
Prime Line C-1204 Mortise Lock Handle Set HANDLE DOOR PATIO WHITE 1/PK  HANDLE SLDG DR WHT MORTISE
Diecast inside pull with wood handle; diecast thumb turn and steel latch activator; diecast outside pull. Handle Type: Mortise Style. Latch Style: Hook Style. Contents: 1 inside pull with thumb latch; 1 outside pull; installation fasteners. Includes the inside handle with concealed screw caps, the outside handle with key lock, the strike and all fasteners. This handle will replace other surface mount installed handle, distance between the screw holes is 6-9/16" (6.56" / 16.76 cm) center to center. The key lock is for convenience and is not high security. Handle is constructed from die cast zinc, and powder coat painted. Standard reversible surface mount for left or right-handed mortise-locking doors. Die-cast inside pull and thumb turn with steel latch activator. Outside pull is die-cast and has a removable knock-out plug for adding a key cylinder. Note: Mounting holes may need to be enlarged to 5/16" diameter if base of handle does not seat flush against surface of door.
HANDLE SLDG DR WHT DCRTV      HANDLE SET SLIDING DOOR WHITE
Low profile; long base die-cast handle set for mortise locks; hook style latch, non-handed. Reversible surface mount for left or right-handed mortise-locking doors. Die-cast inside pull and thumb turn with hook style steel latch activator. Outside pull is die-cast, and must use an E-2145 if key locking feature is desired. NOTE: Latch Lever is offset from center.
   
 
1