Home > HEATING & COOLING > HEAT & AIR CONDITIONING > DUCT WORK
Choose a sub category:
DUCT PIPE DUCT ACCESSORIES REGISTER BOOTS / STACKS
Sort By:
1 2 3 4
FITTING TRUNK TAKE-OFF 4IN GLV FITTING TRUNK TAKE-OFF 4IN GLV DUCT KEY DAMPER 4IN
Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 gauge. Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 gauge. Use to adjust and balance airflow in individual runs of round pipe.
FURN PIPE GALV 4IN X 30IN 30GA CAP ED RND W/O HDL STL GLV 3IN BOOT ANG REGISTER GLV 3X10X6IN
Used to distribute warm and cold air. Imperial End Cap, Round Shape, 3 in Nominal Size, Small End, 30 ga Thickness, Steel, Galvanized, Special Features: Crimped, Usage: Use to Finish The Big No Crimp End of a Round Pipe Run Imperial Register Angle Boot, 30 ga, 90 deg Angle, Steel, Galvanized, 3 x 10 x 6 in, For Right Angle Transition From Round Pipe or Insulated Flexible Duct to a Register or Grille
BOOT REGISTER UNVSL 3.25X10X4 BOOT REGISTER UNVSL 3.25X10X5 BOOT REGISTER UNVSL 3X10X4 GLV
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge.
BOOT REGISTER UNVSL 3X10X5 GLV FURN PIPE GALV 5IN X 30IN 30GA CONNECTOR UNION STEEL GALV 3IN
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge. Used to distribute warm and cold air. For connecting rigid, semi-rigid or flexible pipe together.
CONNECTOR UNION STEEL GALV 5IN GV2062 6IN 90D ELBOW OVAL/FLAT BOOT REGISTER END 3.25X10X5
For connecting rigid, semi-rigid or flexible pipe together. Imperial Oval Flat Elbow, 90 deg, 6 in Outside Dia, 30 ga Thickness, Steel, Galvanized, For Changing the Direction of Airflow in Round Branch Pipe Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
BOOT REGISTER END 3X10X5 GLV  CONNECTOR UNION STEEL GALV 4IN CONNECTOR UNION STEEL GALV 6IN
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. For connecting rigid, semi-rigid or flexible pipe together. Imperial Connector Union, 6 in, Steel, Galvanized, For Connect Rigid, Semi-Rigid or Flexible Pipe Together
GV2078 6IN 90D. ELBOW OVAL    FITTING TRUNK TAKE-OFF 5IN GLV BOOT CEILING REGISTER 4X10X5IN
Imperial Oval Vertical Elbow, 90 deg, 6 in Outside Dia, 30 ga Thickness, Steel, Galvanized, For Changing the Direction of Airflow in Round Branch Pipe Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 gauge. Imperial Register Ceiling Boot, 30 ga, Steel, Galvanized, 4 x 10 x 5 in, For Right Angle Transition From Round Pipe or Insulated Flexible Duct to a Ceiling Register or Grille
BOOT REGISTER END 4X10X4 GLV  BOOT REGISTER ANGLE 3X10X4 GLV DUCT END BOOT 3-1/4 X 10 X 4IN
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
FITTING TRUNK TAKE-OFF 5IN GLV BOOT REGISTER ANGLE 4X10X4 GLV BOOT REGISTER END GLV 3X10X5IN
Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 gauge. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
BOOT REGISTER UNVSL 4X10X4 GLV BOOT REGISTER UNVSL 4X10X5 GLV BOOT REGISTER ANGLE 3X10X5 GLV
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
   
 
1 2 3 4