|
|
|
|
|
|
|
|
|
|
|
TASK Pry Bar, Mini, Flat, 1-1/2 in Tip Width, 5 in Overall Length, Metal, Nickel Plated, Usage: For Removing Small nails, tacks, Opening Paint cans and scraping
|
Made of heat treated carbon steel blade with a square plastic handle.
|
Made from dropped forged, heat treated steel with nail slots at both ends for easy access and leverage.
|
|
|
|
|
|
|
|
|
|
|
|
|
Garant Wrecking Bar, Hexagonal, 12 in Overall Length, Forged Steel, 0.8 lb, 3/4 in Dia, Baked Enamel
|
TASK Nail Set, 2/32 in Tip, Cupped, Hex Stock, Soft Touch Grip Handle, Blue, Used to Countersink Finish Nails
|
TASK Nail Set, 3/32 in Tip, Cupped, Hex Stock, Soft Touch Grip Handle, Red, Used to Countersink Finish Nails
|
|
|
|
|
|
|
|
|
|
|
|
|
TASK Nail Set, 4/32 in Tip, Cupped, Hex Stock, Soft Touch Grip Handle, Green, Used to Countersink Finish Nails
|
Precision ground needle point oil tempered steel blade. Large solid fire-safe unbreakable amber handle. Blade 3-1/4'' x 7/32''.
|
TASK Wrecking Bar, 12 in Overall Length, Drop Forged High Carbon Steel, For Prying, Lifting, Scraping and Pulling Nails
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of dropped forged and heat treated steel with hexagon steel construction for enhanced strength. Single claw tool.
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down.
|
Unitool Flat Chisel, 3/8 in Tip, 5-1/2 in Overall Length
|
Unbreakable handle. 7-5/8'' overall.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stanley Nail Set, 4/32 in Tip, Beveled, Cupped, Chamfered, Long, 5/16 in Stock, Square Stock, 4 in Overall Length, Steel, For Setting Nails into Materials
|
Unitool Flat Chisel, 1/2 in Tip, 6 in Overall Length
|
Garant Wrecking Bar, Hexagonal, 18 in Overall Length, Forged Steel, 2 lb, 3/4 in Dia, Baked Enamel
|
|
|
|
|
|
|
|
|
|
|
|
|
Richard Pry Bar and Scraper, High Carbon Steel Blade, Chisel End Blade, Nail-Pulling Slot, 10 in Total Length
|
Made with tempered steel and heat treated for increased durability. Able to withstand a bending momentum of 310 in-lbs with a high-visibility. Powder coated finish.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
|
Made from drop forged and heat treated steel with hexagon steel construction for strength. Use for precision nail pulling and prying.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat Treated and Tempered Steel (Hardness for Blade HRC 38-42). 6.0 mm Thickness. Matte Black Finish. Nail slots at both ends offer easy accessibility and leverage.
|
Garant Nail puller, Small, Claw, 8 in Overall Length, Hexagonal Handle, Forged and Tempered Steel, For a Variety of Carpentry and Nail-Pulling Applications
|
Unitool Flat Chisel, 5/8 in Tip, 7 in Overall Length
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened steel pin, knurled body provides no slip grip, auto centering, and countersunk end. Used for creating starter screw holes.
|
UNITOOL Pin Punch, 1/8 in Tip, 5-1/2 in Overall Length, ANSI B107.48, 5/16 in Shank
|
UNITOOL Pin Punch, 5/32 in Tip, 5-1/2 in Overall Length, ANSI B107.48, 5/16 in Shank
|
|