Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS
Choose a sub category:
PIPE CEMENTS PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS
THREAD SEALANT TAPES PLUMBERS PUTTY PLUMBING EPOXYS
Sort By:
1 2
Mintcraft PMB-445 Pipe Seal Tape TAPE PIPE SEAL 1/2X60IN       1/2X260 WHITE PTFE TAPE
Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes Plumb Pak Thread Seal Tape, 1/2 in Width, 60 in Length, PTFE Backing, For Threaded Pipe Provides a clean, positive seal on threaded connections. A high density product that resists tearing and stretching for easy, efficient application. Complies with Military Spec. No. T-27730A and UL 31 RO. 3 mils thick, 0.7 grams/cubic centimeter density.
1/2X520 WHITE PTFE TAPE       COMPOUND PIPE JOINT GREY 1OZ  3/4X260 WHITE PTFE TAPE
Provides a clean, positive seal on threaded connections. A high density product that resists tearing and stretching for easy, efficient application. Complies with Military Spec. No. T-27730A and UL 31 RO. 3 mils thick, 0.7 grams/cubic centimeter density. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees F and 10,000 PSI on liquids from -50 to +500 degrees F. For use with water, steam, caustic or dilute acid lines. Can be used with metal threads. Provides a clean, positive seal on threaded connections. A high density product that resists tearing and stretching for easy, efficient application. Complies with Military Spec. No. T-27730A and UL 31 RO. 3 mils thick, 0.7 grams/cubic centimeter density.
TAPE PIPE 1/2X300IN           COMP PP JNT SEALR 40G         GAS LINE TPE PTFE YELLOW 1/2IN
COMP PP JNT SEALR 40G
Our Price: $4.29
Plumb Pak Thread Seal Tape, 1/2 in Width, 300 in Length, PTFE Backing, For Threaded Pipe 40 g. tube. Seals pipe threads tightly. Remains pliable. Lead free. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 - 1.5 grams/cubic centimeter and 4 Mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box.
PIPE THREAD TPE PINK 1/2X260IN CEMENT ABS YELLOW 118ML       COMPOUND PIPE JOINT W/PTF 29ML
Provides fast positive seal for water lines, sewage lines, and sprinkler systems.  Effective on metal or plastic threads. 3 Mils thick, and density of 1.35 - 1.5 grams/cubic centimeter. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. Medium-bodied yellow coloured cement for use on ABS pipe and fittings up to 6" diameter. Use for all types and grades of ABS pipe and fittings for DWV  non-pressure applications. Meets ASTM D-2235. CSA approved. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400F and 10,000 PSI on liquids from -50 to +500F. For use with water, steam, natural and LP gas, oil caustics or dilute acid lines of PVC, CPVC, ABS, cycolac, polypropylene, iron, steel or copper. With teflon.
COMPOUND PIPE JOINT GRY 237ML CLEANER ALL PIPE CLEAR 118ML  PUTTY PLUMBER SS 14OZ
Non-hardening grey paste seals and lubricates threaded joints.  For use on water, natural gas, steam or air line.  Non-separating and non-toxic material.  Not for use on plastic threads. For cleaning ABS pipe and fittings. Removes surface dirt, oil, grease, etc. Insures proper solvent weld. Clear. Oatey Plumbers Putty, 14 oz Capacity, Plastic Container Packing, 20 g/l VOC, >500000 cP Viscosity, Solid, Off-White, Mild Petroleum Odor/Scent, >212 deg F Flash Point, Media: Water Fog, Foam, Dry Chemical Powder and Carbon Dioxide, Composition: Limestone, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Crystalline Silica, 2 Specific Gravity
CEMENT PVC CLEAR 118ML        CEMENT 1-STEP GREY 118ML      CEMENT PVC GREY 118ML
Medium bodied cement for PVC pipe and fittings. Formulated for joining pipe sizes through 6" diameter. CSA approved for use with potable water, pressure, irrigation, gas, conduit, sewer and DWV systems. For all non-pressure PVC DWV piping system up to 6" diameter.  One-step - no primer required.  Reduces time and money.  CSA approved.  Reduced installation time. Medium-bodied gray colored cement for use on PVC pipe and fittings. Up to 6" diameter for Sch. 40 and Sch. 80. Recommended for all grades and types of PVC pipe and fittings, potable water and DWV. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564.
CEMENT TRANS WHT ABS-PVC 118ML PRIMER CRC CLEAR 118ML        CEMENT PVC CLEAR 236ML
PRIMER PVC CLEAR 118ML
Our Price: $6.99
Medium-bodied white coloured cement for use in joining ABS to PVC in non-pressure transition joints.  For use with all schedules up to 6" diameter pipe and fittings. Recommended application temperature 40 degrees F to 100 degrees F. Meets ASTM D-3138, CSA approved. Primer clear PVC/CPVC. For priming PVC or CPVC pipe and fittings. For all schedules and diameters. Softens pipe to allow prompt solvent welding. Formulated to remove surface dirt, grease and grime (DO NOT USE WITH ABS PIPE). Medium bodied cement for PVC pipe and fittings. Formulated for joining pipe sizes through 6" diameter. CSA approved for use with potable water, pressure, irrigation, gas, conduit, sewer and DWV systems.
CEMENT TRNSTN WH PVC-ABS 236ML CEMENT ALL-PRPS MLKY-CLR 118ML PRIMER CRC CLEAR 236ML
CEM PVC&CPVC 236ML CLR
Our Price: $7.59
Medium-bodied white coloured cement for use in joining ABS to PVC in non-pressure transition joints.  For use with all schedules up to 6" diameter pipe and fittings. Recommended application temperature 40 degrees F to 100 degrees F. Meets ASTM D-3138, CSA approved. Medium-bodied milky-clear cement for use on all schedules and classes of PVC and CPVC pipe and fittings up to 12" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, conduit and DWV. Recommended application temperature 40 degrees F to 110 degrees F. Meets performance requirements of ASTM D 2564, D 2235, F 493. A clear aggressive primer for use on , PVC and CPVC pipe and fittings.Lo-V.O.C. Primer meets FixAll South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Removes all surface dirt, grease and grime as well as softens pipe in preparation for solvent cement. Meets ASTM F 656. Not for ABS pipes.
CEMENT PVC GREY 236ML         CEMENT ABS YELLOW 236ML       CEMENT ALL-PRPS MLKY-CLR 236ML
Medium-bodied gray colored cement for use on PVC pipe and fittings. Up to 6" diameter for Sch. 40 and Sch. 80. Recommended for all grades and types of PVC pipe and fittings, potable water and DWV. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. For solvent welding ABS pipe and fittings.  Medium bodied solvent cement-sets up slower than our premium grade.  Allows for greater flexibility when working with large diameter ABS pipe and fittings.  All classes of ABS pipe and fitting up to 6" diameter. Medium-bodied milky-clear cement for use on all schedules and classes of PVC and CPVC pipe and fittings up to 12" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, conduit and DWV. Recommended application temperature 40 degrees F to 110 degrees F. Meets performance requirements of ASTM D 2564, D 2235, F 493.
CEMENT CPVC CLEAR 118ML       CEMENT CPVC CLEAR 236ML       COMPOUND PIPE JNT W/PTF 118ML
Medium-bodied clear coloured cement for use on CPVC pipe and fittings up to 6" diameter. For CTS (copper tube size) and Sch. 80, potable water pressure pipe. Recommended application temperature 40 degrees F. to 100 degrees F. Meets ASTM F-493. CSA approved. Medium-bodied clear coloured cement for use on CPVC pipe and fittings. Up to 6" diameter. Lo-V.O.C. Solvent Cement meets FixAll South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Oatey, Great White Pipe Joint Compound, 4 oz, Can, 3 g/l VOC, 25000 cP Viscosity, Liquid Paste, White, 4 hr Drying Time, Odorless Odor/Scent, >212 Deg F Flash Point, Media: Water Fog, Foam, Dry Chemical Powder, Carbon Dioxide, Composition: Calcium Carbonate, Distillates (Petroleum), Hydrotreated Heavy Naphthenic, Polyfluoroethylene, Titanium Dioxide, Crystalline Silica, Flammability Rating: 0, 1.5 Specific Gravity, Application Method: Brush, -50 To 500 Deg F For Liquid, -50 To 400 Deg F For Gas, 10000 psi For Liquid, 3000 psi For Gas, Includes: Screw Cap With Brush, Standards: NSF, IAPMO Listed, For Water, Steam, Caustics or Dilute Acid Lines of PVC, CPVC, ABS, Cycolac, Polypropylene, Iron, Steel or Copper
   
 
1 2