Home > PLUMBING > ROUGH PLUMBING SUPPLIES > VALVES
Choose a sub category:
GAS VALVES NEEDLE VALVES HOSE BIBBS
BOILER DRAINS STOP VALVES STOP & WASTE VALVES
GLOBE VALVES WATER SUPPLY LINE VALVES BALL VALVES
GATE VALVES CHECK VALVES FOOT VALVES
SILLCOCKS FROSTPROOF SILLCOCKS YARD HYDRANTS
VALVE/SILLCOCK HANDLES MISC VALVES & FITTINGS
Sort By:
1 2 3 ... 15
DRN SEAT BK 1/8IN MPT BRS     DRN SEAT BK 1/4IN MPT BRS     Mueller ProLine In-Line Check Valve
Back seating drain CK. Back seating drain CK. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
HANDLE FAUCET REPL SMALL UNIV HANDLE FAUCET REPL WHEEL UNIV VLV BALL 1/2IN SOLV PVC
Small round hole type, 16 spline broach. M3321 - chrome, complete with button, accent rings, insert and screw M3329 - chrome, flortrol canopy handle for tub/ shower, lavatory, kitchen M6310 - chrome, square stem M6320 - chrome, 12 point stem, large round hole aqua-dynamic Ball Valve, 1/2 in, SCH 40 Pressure Class, 150 psi, 73 deg F, Solvent Weld End Connection, PVC Body, EPDM Seat Trim, EPDM O-Ring Softgoods, White, Standards: ASTM D2466, NSF Certified, ISO 9001
B&K Proline Solvent Stop Valve B&K Proline Solvent Stop Valve HOSE BIBB BRS 1/2IPS 3/4IN
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
VLV BALL 1/2IN THRD PVC       HNDL STP COCK MTL 1/8-3/4IN   Mueller ProLine In-Line Check Valve
aqua-dynamic Ball Valve, Quarter Turn, 1/2 in, SCH 40 Pressure Class, 150 psi, 73 deg F, Threaded End Connection, PVC Body, EPDM Seat, Santoprene Seal Trim, EPDM O-Ring Softgoods, White, Standards: ANSI B1.20.1, NSF Certified, ISO 9002 Wheel handle for 1/8-3/4 VLV Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
VLV BALL MINI 1/2X3/8IN STRT  VALVE ANGLE 1/2 FIP X 1/4 COMP VLV NDL 1/4IN COMP BRS
VLV NDL 1/4IN COMP BRS
Our Price: $6.99
Waterline Ball Valve, Quarter Turn, Straight, 1/2 x 3/8 in, PEX x Compression End Connection, Brass Body, Chrome Plated, Standards: CSA Certified, Lead Free, For Use With PEX Tubing Hot and Cold Water Pressure Application Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome. Bagged. Compression tube to tube. Brass. Bulk.
VLV NDL 1/4IN COMPXM          FCT SEDMT HVY BRS 3/4IN       FCT SEDMT HVY BRS 1/2IN
VLV NDL 1/4IN COMPXM
Our Price: $6.99
Brass. Bulk. aqua-dynamic Sediment Faucet Valve, 3/4 in, Male End Connection, 125 psi, -29 to 93 deg C, Heavy Brass Body, Standards: CSA, cUPC Certified, NSF 61-9 Standards Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61.
VALVE STOP&WST 1/2IN BRS W/DRN VLV ANG 5/8X3/8IN CHRM PLTD   VLV BALL MINI 1/2X3/8IN ANG
aqua-dynamic Stop Valve, 1/2 in Nominal, Threaded End, 125 psi, Brass Body, Neoprene Seal Softgoods, Cast Iron Handle, -29 to 93 deg C, Standards: CSA, cUPC Certified, For Use With Water, Oil or Air Moen Angle Shut-Off Valve, Series: M-Line, 3/8 x 5/8 in Nominal, Compression End, Chrome Plated Brass Body, Standards: cUPC Certified, For Use With Sinks or Toilet Tank Supplies Waterline Ball Valve, Angle, Quarter Turn, 1/2 x 3/8 in, PEX x Compression End Connection, Brass Body, Chrome Plated, Standards: CSA Certified, Lead Free, For Use With PEX Tubing Hot and Cold Water Pressure Application
VALVE ANGLE 5/8 OD X 1/4 COMP VLV BALL 3/4IN THRD PVC       VLV BALL 3/4IN SOLV PVC
Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome plated. Bagged. aqua-dynamic Ball Valve, Quarter Turn, 3/4 in, SCH 40 Pressure Class, 150 psi, 73 deg F, Threaded End Connection, PVC Body, EPDM Seat, Santoprene Seal Trim, EPDM O-Ring Softgoods, White, Standards: ANSI B1.20.1, NSF Certified, ISO 9002 aqua-dynamic Ball Valve, 3/4 in, SCH 40 Pressure Class, 150 psi, 73 deg F, Solvent Weld End Connection, PVC Body, EPDM Seat Trim, EPDM O-Ring Softgoods, White, Standards: ASTM D2466, NSF Certified, ISO 9001
VALVE CHK SUMP PMP 1-1/4IN ABS HNDL FCT LAWN FRST PROOF UNIV Mueller 107-342NL Full Port Ball Valve
Boshart Check Valve, 1-1/4 x 1-1/4 or 1-1/2 in, MPT x Barb or Slip End Connection, PVC Body, 2.8 in Overall Length, 2.8 in Overall Width, 5.8 in Overall Height, For Use With Sump Pumps Wheel handles for 390- Series wall hydrants 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
VALVE 1/2 PVC SPRING LOAD SKT Genova 500 Straight Supply Line Valve VLV NDL 5/16IN COMP BRS
VLV NDL 5/16IN COMP BRS
Our Price: $7.99
Socket weld check valve. Spring loaded. PVC.100 Psi at 73 deg F. 304 Stainless steel. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk. Compression tube to tube. Brass. Bulk.
   
 
1 2 3 ... 15