Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS
Choose a sub category:
WATER HEATERS - GAS WATER HEATERS - ELECTRIC WATER HEATER ACCESSORIES
WATER HEATER REPAIR PARTS
Sort By:
1 2 3
ELL DRN 3/4IN F/WTR HTR       TUBE DRN 3/4IN F/WTR HTR POLY GSKT ELMT SQ RUBB 4BLT
ELL DRN 3/4IN F/WTR HTR
Our Price: $5.69
GSKT ELMT SQ RUBB 4BLT
Our Price: $6.99
For draining valves. For draining valves. Gasket for 4-bolt square flanged element. Grey.
B and K 102-816 Water Heater Drain Valves TRAY WATER HEATER PLSTC 22IN  WATER HEATER CONN 3/4X3/4X12
TRY WTR HTR 22IN PLSTC
Our Price: $11.99
1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7. Manufactured from semi-flexible, tough and durable plastic polymer. Will not rust or corrode. Pan comes with 1 1/2" PVC fitting. Pans are pre-drilled to accommodate fitting. Recommended for electric water heaters. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
CONNECTOR 12IN 1/2SB X 3/4FIP WRENCH SCREW-IN ELMT F/WTR HTR UN DIELE 1/2IN FPTXSOLDER
Element Wrench - for screw-in elements (Fitsall) aqua-dynamic Dielectric Pipe Union, 1/2 in Nominal Size, FPT X Copper Solder, 210 deg F, ANSI B1.20.1/B16.18
VALVE RELIEF T/P NCLX-5 3/4IN CONNECTOR 18IN 1/2SB X 3/4FIP CONN WTR HEATER FLEX HOSE DBRS
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
WATER HEATER CONN 3/4FX3/4X15 VLV DRN FITS NYLN DRN 2-1/2IN VLV VAC RLF BRZ 1/2IN DIA
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. A. O. Smith Heater Drain Valve, Tamper Proof, Plastic Body, White, 2-1/2 in Shank, For Use With John Wood Hot Water Tank Watts Vacuum Relief Valve, Series: N36, 1/2 in, NPT End Connection, 200 psi, Bronze Body, Standards: ANSI Z21.22, CSA, AGA Certified, CGA Listed, For Domestic Water Heaters and Supply Tanks, Table Top Heaters, Jacketed Steam Kettles, Unit Heaters, Low Pressure Steam Systems, Steam Coil Heaters and Automatic Gas Shut Off Devices
VLV RLF TEMP/PRESS 3/4IN BRZ  WATER HEATER CONN 3/4FX3/4X24 VLV RLF TEMP/PRESS 3/4IN BRZ
Watts Temperature/Pressure Relief Valve, Series: 100XL, Self-Closing, 3/4 in, NPT End Connection, 150 psi, Bronze Body, 1-3/4 x 3-1/2 x 1-1/8 in, Standards: ASME Rated, CSA Listed, For Water Heaters up to 105,000 BTU/Hr Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Watts Temperature/Pressure Relief Valve, Self-Closing, 3/4 in, NPT End Connection, Bronze Body
VALVE TEMP/PRESS RELIEF 3/4IN HOS FLEX 1/2IN PFIT SS        VLV PRESS RLF ADJ 3/4IN BRZ
Watts Shank Relief Valve, Long, 3/4 in, 150 - 210 psi, Bronze Body, Stainless Steel Spring aqua-dynamic Hose Connector, Braided, Flexible, 1/2 in Nominal, Push-Fit Connection, 12 ft Length, 200 psi, -18 to 121 deg F, Stainless Steel, For Joining Copper, CPVC and PEX Pipe Watts Pressure Relief Valve, Series: 3L, Safety, 3/4 in, 75 - 200 psi, Bronze Body, Stainless Steel Spring, Test Lever Actuation, 3-11/4 in Height x 1-5/32 in Width, Standards: ASME Listed, CSAus Certified
VLV PRESS RLF TEMP BRZ 3/4IN  VLV RLF TEMP/PRESS 3/8IN BRZ  TRAY WATER HEATER PLSTC 24IN
TRY WTR HTR 24IN PLSTC
Our Price: $22.99
Watts Pressure Relief Valve, Heating Specialties, 3/4 in, Bronze Body Watts Temperature/Pressure Relief Valve, Self-Closing, 3/8 in, Bronze Body, 12-7/8 in Length x 7-1/2 in Width X 8-7/8 in Height, For Water Heaters up to 100,000 BTU/Hr Manufactured from semi-flexible, tough and durable plastic polymer. Will not rust or corrode. Pan comes with 1 1/2" PVC fitting. Pans are pre-drilled to accommodate fitting. Recommended for electric water heaters.
TRAY WATER HEATER PLSTC 26IN  KT VLV 1/2INFPTX3/4INPFIT BRS KT VLV 3/4IN PFITX3/4INFPT BRS
TRY WTR HTR 26IN PLSTC
Our Price: $22.99
Manufactured from semi-flexible, tough and durable plastic polymer. Will not rust or corrode. Pan comes with 1 1/2" PVC fitting. Pans are pre-drilled to accommodate fitting. Recommended for electric water heaters. Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip.
VALVE RELIEF T/P NCLX-5LX 3/4 ELMT HTR WTR CU 1500W         KIT PART WTR HTR 55IN SCREW-IN
A. O. Smith Water Heater Element, Screw-In, 120 V, 1500 W Power, Suitable For Use With: GSW, John Wood, Rheem, State and Jetglas Models, Copper Gas/Electric Water Heater Dip Tube
   
 
1 2 3