Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS
Choose a sub category:
CPVC FITTINGS PVC - PRESSURE FITTINGS PVC SCH 80 PRESSURE FITTINGS
PVC - DWV FITTINGS PVC - S&D FITTINGS ABS - DWV FITTINGS
INSERT FITTINGS NYLON PIPE & HOSE FITTINGS PUSH FIT FITTINGS
FLAIR IT FITTINGS PEX CRIMP INSERT FITTINGS CORRUGATED SNAP FITTINGS
IRON PIPE FITTINGS- GALVANIZED STEEL PIPE FITTINGS-GALVANIZED IRON PIPE FITTINGS-BLACK
STEEL PIPE FITTINGS- BLACK COPPER FITTINGS BRASS FLARE FITTINGS
GAS LINE FITTINGS WATER SERVICE FITTINGS BRASS COMPRESSION FITTINGS
BRASS PIPE FITTINGS BRONZE PIPE FITTINGS BRASS HOSE BARBS
YARD DRAINS & BASINS
Sort By:
1 2 3 ... 20
INS PP 5/16IN TB F/POLY TB BRS INSERT PP 1/4IN COMP NYLON    PLG TEST 1/2IN CRMP PLSTC
Fairview Tube Insert, 5/16 in Tube, Compression Connection, 150 psi, Brass, 0.187 in ID Tube, -0 to 150 deg F Working Temperature, For Pneumatic Instrumentation, Lubrication and Coolant Lines and Applications With Other Gases and Fluids Compatible With the Tubing and Used With Polyethylene Tube Fairview Tube Insert, 1/4 in Tube, Compression Connection, 50 psi, Nylon, Standards: FDA Approved, -40 to 220 deg F Working Temperature, For General Purpose Air, Water and Other Low Pressure Applications AccuCrimp Test Plug, 1/2 in PEX Nominal Size, Plastic
1446004 1/2IN BRASS PEX PLUG  1443244 1/2IN PEX ADAPTER CPLG INSERT PP 3/8IN COMP NYLON
Brass pex plug. Pex adapter cplg. Male sweat x PEX. Fairview Tube Insert, 3/8 in Tube, Compression Connection, 50 psi, Nylon, Standards: FDA Approved, -40 to 220 deg F Working Temperature, For General Purpose Air, Water and Other Low Pressure Applications
ELL 1/2IN CRMP PLSTC          1443344 1/2IN 1/2INFEMALE SWEA 1443144 1/2IN PEX COUPLING
AccuCrimp Tube Elbow, 1/2 in Nominal, PEX End, Engineered Plastic, Standards: CSA B137.5, For Use With Crimp Rings and Tools as PEX Fittings Female sweat x pex adapter cplg. Pex coupling.
INSERT REDUCING COUPLING 1X1/2 NUT COMPRESSION PP 1/4IN NYLON CPLG CRMP PLSTC 3/4X1/2IN
Reducing coupling. Gray. For plumbing, water well, pool and spa, irrigation and farm supply markets. Fairview Tube Nut, Standard, 1/4 in Nominal, Compression End, 50 psi Working, Nylon, -40 to 220 deg F, Standards: FDA Approved, For General Purpose Air, Water and Other Low Pressure Applications Is a great alternative to brass but connected using the same crimping methods as brass fittings. Use in well water sourced potable water. Being made of engineered plastic makes it resistant to chlorine stress crack corrosion and scaling. Has unique positioning tabs that provide accurate crimp positioning every time.
CPLG CRMP PLSTC 3/4IN         1446006 3/4IN BRASS PEX PLUG  1443166 3/4IN PEX COUPLING
CPLG CRMP PLSTC 3/4IN
Our Price: $1.39
Is a great alternative to brass but connected using the same crimping methods as brass fittings. Use in well water sourced potable water. Being made of engineered plastic makes it resistant to chlorine stress crack corrosion and scaling. Has unique positioning tabs that provide accurate crimp positioning every time. Brass pex plug. Pex coupling.
PLG TEST 3/4IN CRMP PLSTC     TEE PP 1/2IN CRMP PLSTC       Genova 52705 CPVC Fittings
AccuCrimp Test Plug, 3/4 in PEX Nominal Size, Plastic AccuCrimp Hose Tee, 1/2 in Nominal, PEX End, Plastic Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45 degree elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as a wall or ceiling.
TEE POLY 1/2BARB X 1/2FPT     NUT COMPRESSION PIPE 1/4IN SS NUT COMPRESSION PP 3/8IN NYLON
Combination tee. Female. PVC. Grey. Fairview Tube Nut, Standard, 1/4 in Nominal, Compression End, 50 psi Working, Nylon, -40 to 220 deg F, Stainless Steel Gripper, For General Purpose Air, Water and Other Low Pressure Applications Fairview Tube Nut, Standard, 3/8 in Nominal, Compression End, 50 psi Working, Nylon, -40 to 220 deg F, Standards: FDA Approved, For General Purpose Air, Water and Other Low Pressure Applications
BEND SUPP W/NAIL TAB 1/2IN    ELL 3/4IN CRMP PLSTC          ADAPT 1/2IN M ENGNRD PLSTC
Waterline Bend Support, Suitable For Use With: PEX Tubing, 1/2 in, Plastic, Standards: ANSI Specified, NSF 61 2008 Annex G, CSA B137.5, For Hot and Cold Water Pressure Application AccuCrimp Tube Elbow, 3/4 in Nominal, PEX End, Engineered Plastic, Standards: CSA B137.5, For Use With Crimp Rings and Tools as PEX Fittings Waterline Crimp Adapter, 1/2 X 1/2 in Nominal Size, Insert X MPT, Plastic, CSA B137.5, Use in well water sourced potable water
CPLG CRMP PLSTC 1/2IN 25/PK   1443266 3/4IN PEX ADAPTER CPLG Genova Products 50475 CPVC Fittings
Is a great alternative to brass but connected using the same crimping methods as brass fittings. Use in well water sourced potable water. Being made of engineered plastic makes it resistant to chlorine stress crack corrosion and scaling. Has unique positioning tabs that provide accurate crimp positioning every time. Pex adapter cplg. Male sweat x PEX. Used to adapt to metal FIP threaded fittings to smaller pipe size in cold water applications only! Teflon thread tape is recommended for threaded joints. Boxed.
TEE PP 1/2X1/2X3/4INCRMP PLSTC TEE PP 3/4X1/2X1/2INCRMP PLSTC TEE PP 3/4X3/4X1/2INCRMP PLSTC
AccuCrimp Hose Tee, 1/2 x 1/2 x 3/4 in Nominal, PEX End, Plastic AccuCrimp Hose Tee, 3/4 x 1/2 x 1/2 in Nominal, PEX End, Plastic AccuCrimp Hose Tee, 3/4 x 3/4 x 1/2 in Nominal, PEX End, Plastic
   
 
1 2 3 ... 20