Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
SHOWER HEADS SHOWER HEAD PARTS & ACCESS. TUB SPOUTS
TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 4
DIVERTER SHWR KNOB UNIV #10455 DRAIN PVC SNAP-IN 3IN         Mintcraft B1140WH Shower Arms
Replaces O.E.M. #10455. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Standard 1/2", Plastic. Overall length 7".
CROSSBAR WST & OVRFLW UNIV    DRAIN PVC SNAP-IN 4IN         Mintcraft B1140CP Shower Arms
Moen Overflow Plate Bracket, Series: M?Line, For Use With: All Standard Shower Heads, 5.56 in Height X 0.09 in Width X 0.63 in Depth, Metal, Includes: Nylon Cross Bar and Metal Screw Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Standard 1/2", Plastic. Overall length 7".
SHWRHD ADJ 2.5GPM CHRM        World Wide Sourcing PMB-020 Shower Adapters SHOWER DRAIN PVC OFFSET 2IN
SHWRHD ADJ 2.5GPM CHRM
Our Price: $6.99
Chrome plated plastic with 2" face. Fully adjustable from fine to coarse spray with plastic ball joint. Shower flow adjuster. 1/2" IPS. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
FLW CTRL ADJ CHRM PLSTC       VLV DIVRT SHWR UNIV CHRM PLST STRAINER SNAP-TITE PB 4-1/4IN
Moen Shower Flow Control, Series: M?Line, 3.81 in Height X 2.69 in Width X 1.13 in Depth, Plastic, Chrome Plated, Includes: Washer, Bibb Screw and O Ring Moen Hand Held Shower Diverter, Series: M?Line, Plastic, Chrome Plated 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
PLT WST & OVRFLW CHRM PLTD    CRTG DRN MTL 5/16IN THRD CHRM PLT FCE WST & OVRFLW UNIV
Moen Overflow Plate, Series: M-Line, 1-Hole, Chrome Plated, Includes: Mounting Screws 5/16'' Threaded. Chrome. For Replacement of tip-toe and push drains. Moen Overflow Plate, Series: M-Line, 2-Hole, Chrome Plated, Includes: (2) Mounting Screws
B & K 133-106 Shower Drain NPL SPT TUB 1/2X3-1/4IN THD   SHOWER DRAIN SOLVENT WELD 2IN
For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. Tub spout nipple coarse thread. Made of brass. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
SHWRHD ADJ 2.5GPM CHRM        SPOUT BATHTUB 3/4             DRN STPR POP UP 1/4IN
SHWRHD ADJ 2.5GPM CHRM
Our Price: $10.99
DRN STPR POP UP 1/4IN
Our Price: $10.99
Adjustable head from coarse to fine spray.  Chrome plated plastic with a plastic ball joint and 2" face. Plumb Pak Bathtub Spout, 3/4 in IPS Connection, Die-Cast, Chrome Plated, Suitable For Use With: 1/2 in Pipe 1/4" Pop-Up Drain Strainer. 1 year warranty.
World Wide Sourcing 24500 Bathtub Spouts NPL SPT TUB 1/2X4-1/2IN THD   STRAINER SNAP-TITE SS 4-1/4IN
Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe. Tub spout nipple coarse thread. Made of brass. 4-1/4" x 4-1/2" square snap-in strainer. For use with the Oatey 130 Series drains. Carded.
Mintcraft B42014 Personal Shower Hoses Mintcraft B1105WH Shower Arm Brackets FLG CHRM PLT 6X1/2IN BRS
72" PVC hose with metal hex nuts. Includes 2 pc washers and pipe tape. ABS construction. Metal ball joint. Moen Shower Arm and Flange, Series: M?Line, For Use With: All Standard Shower Heads, 1/2 in IPS, 6 in Shower Arm, 8.5 in Height X 4.56 in Width X 1 in Depth, Brass, Chrome Plated, Includes: Chrome-Plated Flange, 0.253 lb Item Weight
DRAIN SHWR PAN LINER WHT 2IN  STRAINER SNAP-TITE SS 4-1/4IN SHOWER DRAIN SOLVENT WELD 2IN
Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
   
 
1 2 3 4