Home > ELECTRICAL > ROUGH ELECTRICAL > SWITCHES & RECEPTACLES
Choose a sub category:
DUPLEX RECEPTACLES SINGLE RECEPTACLES GFCI RECEPTACLES/SWITCHES
APPLIANCE RECEPTACLES RECEPTACLE COMBOS MOTION SENSOR SWITCHES
SINGLE POLE SWITCHES 3-WAY SWITCHES 4-WAY SWITCHES
DOUBLE POLE SWITCHES SWITCH COMBOS SWITCH/RECEPTACLE COMBOS
DIMMER SWITCHES FAN CONTROL SWITCHES WIFI / SMART SWITCHES & CONTRO
FAN PULL CHAIN SWITCHES PUSH BUTTON SWITCHES TOGGLE SWITCHES
ROTARY SWITCHES IN-LINE SWITCHES MISC SWITCHES
INDOOR PHOTOCELLS
Sort By:
1 2 3 ... 8
RECEPTACLE DUPLEX             RECEPTCLE DPLX STD 3WR 15A IVR RECEPT DUPLEX 2P3W
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt.
270W RECEPTACLE DUPLEX WHITE   DUPLEX TR RECEPT WHITE       SWITCH DIMMER KNOB ROTARY IVY
Built-in wire stripper for number 14 wire. Built-in wire looper for pre-looping conductors. Screw-catch feature eliminates need to hand-thread screw and possible cross-threading. Double wipe ground contacts. Split circuit break-off tab. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire only. 15 amp/125 volt. UL Listed, NOM certified, meets CSA requirements. Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for #14 and #12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to #10 solid or stranded wire. Push in terminals accept #14 solid wire. Screw-catch feature speeds wall plate installation. UL, cULus Listed. CULus Listed, NOM certified.
SWITCH DIMMER KNOB ROTARY WHT 15A-125V RECEPTACLE WHT       SWITCH TOGGLE 3WAY S/WIRE BRWN
CULus Listed, NOM certified. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for number 14 and number 12 wire and wire looper for pre-looping. Combination slot/Phillips head mounting and terminal screws for installation with power screwdrivers. Terminal screws backed out - ready for wiring. Side wire terminals accept up to number 10 solid or stranded wire. Push-in terminals accept number 14 solid wire. Temperature range of -40 to 65 degrees C. Meets all UL 498 requirements, (file no. E15058), Fed. Specs. WC-596G, NOM Certified, CSA Certified, C22.2 no.42. Standard Grade: (file no.6914) (6233-01). Meets flammability requirements per UL94, V2 rated. 15 amp, 125 volt. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements.
SWITCH TOGGLE 3WAY S/WIRE IVRY DIMMER KNOB ROTARY RES WHITE  KNOB ROTARY DIMMER REPLC IVORY
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Leviton Dimmer Knob, Replacement, For Use With: Trimatron Rotary Devices, White, 1-1/2 in Dia x 1/2 in Depth, UL Listed, CSA Certified
WHITE RECEPTACLE DOU          SP RKR SWITCH 1P BLK          C WHITE SP SWITCH DECO
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
DECO DUPLEX RECPT IVRY        RECEPTACLE DPX BROWN 15A/125V RECEPTACLE DPLX HD 3WR 15A IVR
DECO DUPLEX RECPT IVRY
Our Price: $3.29
Receptacle is tamper resistant with a UL Listed shutter system and impact-resistant thermoplastic face and back body that is virtually unbreakable. The 2008 National Electrical Code (NEC) states that "Effective January 1, 2008, all receptacles installed in new dwelling units must be tamper-resistant." Features a wire stripper for number 14 and number 12 wire, extra long and wide mounting straps and tri-combo screws that accept slotted, Phillips and Robertson-head tools. Terminal screws are backed out and ready to wire. Side-wire terminals accept up to number 10 solid or stranded wire. Push in terminals accept number 14 solid wire. Screw-catch feature speeds wall plate installation. 15 amp, 125 volt. NEMA 5-15R. UL, cULus Listed. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed.
 WHITE  20AMP SDARD           RECEPTACLE DPLX IVORY 15A/125V RECEPTACLE DPLX WHT 15A/125V
Cooper Duplex Receptacle, Auto Grounding, Straight Blade, Tamper Resistant, Series: TR370, 2 Pole, 3 Wires, 14 - 10 AWG Wire, 20 A, 125 V, NEMA 5-20R, 2 Pole/3 Wire Grounding, 4 in Overall Length, 1.24 in Overall Width, 0.79 in Overall Depth, Thermoplastic, White, Standards: cUL/UL Listed, NOM Certified, Special Features: Side Wire, Usage: For Residential Applications Meets all UL 498 and 1567 requirements. Longer, wider strap provides 40 percent more contact area. Side wire terminals accept up to #10 solid or standard copper or aluminum wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. 15 amp, 125 volt. Bulk pack. Meets all UL 498 and 1567 requirements. Longer, wider strap provides 40 percent more contact area. Side wire terminals accept up to #10 solid or standard copper or aluminum wire. Terminal screws backed out. Combination slot/Phillips head mounting and terminal screws ease installation with power screwdrivers. 15 amp, 125 volt. Bulk pack.
RECEPTACLE DPLX IVORY 20A/125V SWTCH INLINE LMP SPT2 UNIV BRN C RCKR SW 3WAY BLACK
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. In-line feed through ON/OFF switch. For 18/2 SPT wire. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
WHT COM GRD RECEPT 15A        CORD SWITCH #18 IV            SWITCH CORD WHITE 3A 120V
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. In-line ON/OFF switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 amp/125 volt AC; 3 amp/250 volt AC; 3 amp/125  volt AC "T". For #18 SPT-1. In-line ON/OFF switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 amp/125 volt AC; 3 amp/250 volt AC; 3 amp/125  volt AC "T". For #18 SPT-1.
RECEPTACLE DPLX WHT 20A/125V  SWTCH INLINE LMP SPT2 UNIV WHT 30A DRYER RECEPTACLE
Triple wipe line contacts provide long-term plug retention. Double wipe ground contacts. 0.050" thick steel wrap-around mounting strap zinc-plated for corrosion resistance. Split circuit break-off tab. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Side wire terminals accept up to #10 solid or stranded wire. Meets all UL 498 requirements UL Listed. In-line feed through ON/OFF switch. For 18/2 SPT wire. Flush mount, dryer. Heavy gauge steel mounting strap, zinc plated for corrosion resistance. For use with copper or aluminum wire, accepts up to number 4 wire. Straight blade. UL Listed Meets all CSA requirements, NOM Certified.
   
 
1 2 3 ... 8