Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
SPRAY STAIN KILLERS PRIMERS - OIL BASED SHELLAC BASED & ALCOHOL BASED
PRIMERS - WATER BASED MASONRY SEALERS SANDING SEALERS
FABRIC SEALERS/WATERPROOFERS
Sort By:
1 2 3 ... 5
PRIMER SEALER INTR CEIL 454 G CLNR ETCH/CONCRT PRE-MXD 355ML PRMR INTR/EXTR 369G AERO WHT
A stain blocker and touch-up paint in one. Vertical aerosol for overhead professional projects. Quick cure for water stains. Flat white finish matches most ceiling tiles. Low odor. For use on concrete & masonry to remove tough, caked-on efflorescence and excess mortar build-up. Provides a light surface etch to promote the coating penetration and adhesion. Seals deep cracks and holes. Adheres to wet surfaces. Use on new drywall, wood, masonry, metal, glossy surfaces and more. blocks stains from crayons, graffiti, grease spots, tannins and light water stains. Mold and mildew resistant film.
PRIMER SEALER ODORLESS 369G   PRMR INTR/EXTR 369G AERO WHT  Sherwin-Williams THC050502-18 Fabric Seal
Developed for "people-sensitive" areas in commercial and residential environments. Kills stains from water, graffiti, ink, and crayon. Sticks to all surfaces without sanding. Can be use under or over any oil, latex topcoat, old alkyd paints and varnishes or left uncoated for a bright white, dead-flat finish. Seals porous surfaces and has high pH resistance. For masonry, plaster and fast-set joint compounds. Non-yellowing, sands easily. Dries in 30 minutes. Can be recoated in two hours. Covers 37 square meter per 3.7L container. Seals water, smoke & nicotine stains. Ideal for construction and remodeling work as well as repainting. May be used under any oil-base or waterbase topcoat. Covers 37 - 41.8 square meter per 3.7 L container. Recoat in 2 hours. Provides maximum strength waterproofing protection for fabric surfaces such as patio cushions, pillows and umbrellas. Contains UV inhibitors in order to resist color fading caused by the sun. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe.
PRIMER SEALR SHELLAC BIN 473ML PRMR INTR/EXTR WTR BSD 902ML  PRIMER SEALER INTR EXTR 946 ML
White pigmented. Permanently seals in every stain and new wood even knots and sap streaks. Sticks to any surface without sanding. Hides water stains, graffiti, seals out smoke and pet odors. Fast-drying. Topcoat with either oil or latex paint. Covers 47 square meters per 3.7 L container. Designed to accept up to 6 oz of colorant per gallon to tone the surface towards the finish color and increase hiding power of the topcoat. Improves the coverage of dark color topcoats. Seals and tones the surface. Use over or under any paint. Covers approximately 37 -41.8 sq m per 3.6L container. Use on new drywall, wood, masonry, metal, glossy surfaces and more. blocks stains from crayons, graffiti, grease spots, tannins and light water stains. Mold and mildew resistant film.
PRIMER SEALER OIL BASE 946ML  PRIMER INTR WHITE ALKYD  946ML PRIMER SEALER SHELLAC BIN 369G
Seals water, smoke & nicotine stains. Ideal for construction and remodeling work as well as repainting. May be used under any oil-base or waterbase topcoat. Covers 37 - 41.8 square meter per 3.7 L container. Recoat in 2 hours. For sealing knots and blocking water stains, fire and smoke damage. Dries in 35 minutes. Recoat in 2 hours. White pigmented. Permanently seals in every stain and new wood even knots and sap streaks. Sticks to any surface without sanding. Hides water stains, graffiti, seals out smoke and pet odors. Fast-drying. Topcoat with either oil or latex paint. Covers 47 square meters per 3.7 L container.
Drylok 27512 Latex Based Masonry Waterproofer PRMR INTR OIL BSD 946ML WHT   PRMR INTR/EXTR 946ML WHT
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Developed for "people-sensitive" areas in commercial and residential environments. Kills stains from water, graffiti, ink, and crayon. Sticks to all surfaces without sanding. Can be use under or over any oil, latex topcoat, old alkyd paints and varnishes or left uncoated for a bright white, dead-flat finish. Seals porous surfaces and has high pH resistance. For masonry, plaster and fast-set joint compounds. Non-yellowing, sands easily. Dries in 30 minutes. Can be recoated in two hours. Stops peeling paint by gluing down worn paint edges from previous paint jobs that can lead to topcoat cracking. Creates a smooth finish. Seals weathered surfaces. Dries white. Topcoat in 2 hours. Covers 5-19 sq m per 3.78L container.
PNT RECYCLED INTR 3.78L WHT   Recochem 33-691ARM Armor All - Copper II Wood Preservative Recochem 33-701ARM Armor All - End Cut Wood Preservative
A primer-sealer and undercoater for new or acrylic painted surfaces. Can be used in any room of the house, for their walls and ceiling. Easy to apply, excellent adherence, non-splattering and excellent hiding capacities. A green solution that provides protection against rot and mildew on above ground exterior lumber such as sashes, doors, millwork, fences, windows and plywood. Formulated for projects where a "soft green" finish matching typical pressure treated lumber colour and no after-coat of paint is desired. Ideal for greenhouse and garden timbers housing non-food producing plants. A green solution that provides protection for cut or drilled wood from rot and mildew on above ground exterior lumber. Formulated for projects where a "soft green" finish matching typical pressure treated lumber colour that, over time, will blend with the uncut portion of wood. May be used on  greenhouse and garden timbers in close contact with non-food producing plants.
Recochem 33-761ARM Armor All Wood Preservative Recochem 33-721ARM Armor All Wood Preservative PRIMER SEALER BONDZ 946ML
A brown solution that provides protection against rot and mildew on sashes, doors, fences, windows, decks, and outdoor furniture. Matches new pressure treated wood and is formulated for projects where a brown tint is desired. Also suitable for treating end cuts. A clear solution that provides protection against rot and mildew on above ground exterior lumber such as fences, decks, sashes and doors. Formulated for projects where no colour change is needed or projects that will be stained or painted. Urethane modified acrylic bonding primer bonds any topcoat to hard, dense surfaces. Topcoat in 2 hours.  Adheres in moist or humid environments.
Minwax CM6570000 Low VOC Professional Sanding Sealer PRIMER INTERIOR 946ML WHITE   PRIMER SEALR SHELLAC BIN 946ML
Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be topcoated with any Minwax oil or water-based polyurethane finish. Sticks to all surfaces. Seals knots. Blocks odors. Blocks smoke and water stains. Water-based. White. Tintable. White pigmented. Permanently seals in every stain and new wood even knots and sap streaks. Sticks to any surface without sanding. Hides water stains, graffiti, seals out smoke and pet odors. Fast-drying. Topcoat with either oil or latex paint. Covers 47 square meters per 3.7 L container.
SEALR MASON STN CNCRT 3.78L   PRMR INTR/EXTR 3.78L          PRMR LATEX INTR 3.78L WHT
PRMR INTR/EXTR 3.78L
Our Price: $32.99
Protects and maintains the appearance of concrete floors, paving stones, quarry tiles, masonry, concrete blocks and bricks. This extremely durable, water-based clear acrylic sealer helps reduce dust accumulation on concrete and resists gasoline, motor oil and automotive chemicals. Also protects against de-icing salt and spalling due to repeated freeze/thaw cycles. Like sandpaper and sealer all in one. Universal primer that goes on any surface and under any paint. Use to eliminate the need for sanding most glossy surfaces. It dries on most surfaces in 20 minutes and is ready for painting in 2 hours. Formulated to give sealing properties. Ideal for new drywall. Easy to apply, good flow and leveling, low odor, good hiding ability, dries quickly and has excellent sealing. Dries in 4-6 hours
SEALER WTRPRF CRYSTAL CLR 3.7L Thompson's WaterSeal THCP40011-02 Low VOC Water Sealant WTRPRFR MSNRY 3.78L DRYLOK WHT
Water-based silicone coating. Designed to provide protection on a multitude of surfaces by coating the pores of the substrates with silicone. For use on wood, brick, concrete and masonry. Penetrates and fills the pores of the substrate with premium grade silicon sealer. Ideal for new or properly reconditioned decks, fences, siding, shingles, shakes and logs. Covers 100-250 sq. ft. per gallon. Rates will vary depending on porosity of the surface. Use on decks & fences, brick patios, concrete driveways, exterior surfaces. Use when mildew/biological factors are not a problem. Prevents water damage. Beads & waterproofs. Allows wood to gray naturally. Actual coverage will vary considerably due to porosity of surface materials. Dries clear. Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
   
 
1 2 3 ... 5