Home > HARDWARE > WINDOW & DOOR HARDWARE > BARN DOOR HARDWARE
Choose a sub category:
BARN DOOR TRACK / BRACKETS BARN DOOR HANGERS BARN DOOR GUIDES
BARN DOOR PULLS / LATCHES
Sort By:
1 2 3 4
Stanley 193839 Round Rail Track End Cap BRACKET FLASHING SNAP ON ZINC PULL UTILITY DOOR MTL ZN 1/PK
With  bolt, nut and washer. Pack loose. Richelieu Utility Pull, Heavy Duty, 7 in Length, 35.16 mm Width, 40.5 mm Depth, Steel, Zinc, Visual Pack
National Hardware V6 Extra Heavy Door Pull Stanley 235309 Open Bar Holder BRACKET SINGLE WALL MOUNT ZINC
National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, Zinc Plated Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel.
Stanley 235291 Closed Bar Holder HOLDER BAR CLST ZINC MTL 1/PK HLDR BAR CLSD ZN MTL
Used to reinforce doorways against forced entry by providing secure placement of 2x4 lumber against entry side of door. 2x4 must be slid through the  bar holders. Clearance for 1/4" bolts. Manufactured from hot rolled steel. Zinc.  Bulk, no screw. Richelieu Bar Holder, Closed Design, 162 mm Length, 37 mm Width, Steel, Zinc
Stanley 104331 Single Side Bracket Stanley 51L2 Double Triangle Bracket BRACKET SINGLE WALL GALVANIZED
BOX RAIL BRACKETS GALV
Our Price: $8.99
Designed as a support bracket for Stanley's 105270, 105676, 105213, and 105726 box rail at 24" OC intervals. Includes lags. Display packed. Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. safe working load.
DOOR BUMPER ZINC 6-1/4IN      Stanley 100834 Door Bumper RAIL ROUND SINGLE GALV
Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed.
ROLLER STAY SLIDING DOOR ZINC LATCH JAMB SLIDING DOOR ZINC  National Hardware V6 Extra Heavy Door Pull
National Hardware Door Pull, Extra Heavy, Series: V6, Suitable For Use With: Metal and Wood Doors, 6-3/4 in Length, 1.38 in Width, 1.82 in Depth, Steel, White, Vinyl Coated
BRACKET BOX RAIL ZINC         Stanley 100875 Adjustable Reversible Stay Roller Stanley 104380 Splice Bracket
BOX RAIL BRACKETS ZINC
Our Price: $12.99
Designed to join #5114 or #5116 box rail. Brackets can be installed on a 2 x 6 header board. Offset nail holes for quick placement. Compatible with 5438 & 5439 snap-on flashing brackets. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of rail. One splice bracket should be installed on every length of rail to lock it in place. Pack loose. Without screws. Each loose. Designed to join two pieces of Stanley's 105270, 105676, 105213, and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags.
Stanley DP5421BC Single Round Rail Splice Bracket ROLLER STAY SLIDING DOOR ZINC GDE ASSEMBLT BTM MTL
GDE ASSEMBLT BTM MTL
Our Price: $14.99
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lbs. Universal fit bottom guide for Top Roll sliding doors. Connector Arm Slides into notch in bottom rail. Side arm locks into side stile. Guides compensate fo uneven floors.
GUIDE SINGLE DOOR ZINC        Stanley 131490 Adjustable Reversible Stay Roller Stanley 162297 Single Adjustable Door Stop
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4" thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed Designed to engage the bottom of a single TAB-LOC door in either the open or closed position to hold firm against the building. For bi-parting doors stop engages in the open position only, also used on wood frame doors using #6061 or #6062 continuous bottom guides. Slotted holes in each leg allow both lateral and vertical adjustments. Bolt, nut, and washer are included for easy attachment. Boxed.
TRUCK-BOX RAIL ZN             BRACKET ADJ DOUBLE WL MT GALV National Hardware DP51MBC Single Box Rail Bracket
BOX RAIL BRACKETS GALV
Our Price: $19.99
Packed With Wheel Trucks Only. Durable one piece, precision formed steel. Comes with self-lubricating Deirin Bearings. Suitable for use with No 59, 5100, 5103, 5104, 5105, 5110, 5114 or 5116 box rail. 225 lb/hanger safe working load, 2.14" diameter. 4.15"L x 3"W x 1.61"D. Standards: BHMA A138.18 specified. Designed for mounting #5114 or #5116 box rail. Includes 2 lag bolts, carriage bolt and nut. BHMA A138.18. Suitable for use on corrugated metal siding due to narrow mounting surface on sliding door systems. Adjustable to bring rail closer or further away from building. 300 lb safe working load. 7.12"L x 3.25"W x 2"D. Can be used with flashing with the 5151 flashing bracket.
   
 
1 2 3 4