|
|
|
|
|
|
|
|
|
|
|
Bottom, jamb-mounted, universal-design 3-1/4"L x 1-1/4"H zinc plated steel bracket with 11/32"W white nylon tips. 1-5/8" opening for 1-3/8" thick doors. Includes four 3/4" x 15 gauge flat head drive nails.
|
Stabilizes sliding movement and provides guide at bottom or door. Adjustable to fit single Pocket Doors 3/4" to 1-3/8" thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This guide uses slotted mounting holes to adjust a pocket door horizontally. Can be used with any door thickness. Lighter weight for hollow core doors. Sold in pairs.
|
2 piece bottom guide; jamb mounted; slotted mounting holes for horizontal adjustment of pocket door; for use with any door thickness. Contains 2 guides; 2 installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Johnson Pocket Door Pull, Dummy, Suitable For Use With: 1-3/8 in Door Thickness, 2-1/8 in Diameter, Bright Brass Plated
|
|
Used to join two pocket door frames together. Keeps door frames in alignment. Includes 2 plates and 2 door stops.
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lbs weight capacity. 1" x 3" plate size.
|
Fits doors from 1-1/4? to 1-5/8? thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance.
|
Fits doors from 1-1/4? to 1-5/8? thick. Includes flush pull on edge of door. Manufactured of solid brass for maximum corrosion resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for joining two Johnson Pocket Door Frames.
|
Solid brass faceplate. (2-1/2"L x 2-11/16"W). Adjustable for 1-3/8" or 1-3/4" doors, without the need for special screws. Coined edges eliminate bowing of faceplate. Curved zinc die cast finger pull. Inner working construction eliminates jamming of lock.
|
Reversible handings with pull-out edge tab. Will fit 1-3/8" thick doors only. Mortise installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Mortise latch unit with privacy lock feature, and pull-out edge tab. Reversible; fits 1-3/8" thick doors. Latch engages and disengages by rotating round thumb turn. 1-3/8"W x 2-3/4"H.
|
Solid brass faceplate. (2-1/2"L x 2-11/16"W). Adjustable for 1-3/8" or 1-3/4" doors, without the need for special screws. Coined edges eliminate bowing of faceplate. Curved zinc die cast finger pull. Inner working construction eliminates jamming of lock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For retrieving door when flush with wall. For use on any door 25mm (1") or more in thickness. All metal construction.
|
Sliding door lock and pull for passageway (pocket) doors; reversible; adjust from 1-3/8" to 1-3/4" thick doors. Contents: 1 lock and pull; 1 set of installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
Taymor Sliding Door Lockset, Series: Professional, Pocket, Suitable For Use With: 1-3/8 in Door Thickness, C26D Satin Chrome
|
Hardware kit for 1500 series pocket door frames includes: No.1120 hanger, No.1513 bumber, No.1550 guide, No.1712 adjustment wrench and screws.
|
Weiser Pocket Door Lock, Round, Satin Chrome, For Bedroom or Bathroom Privacy Door
|
|
|
|
|
|
|
|
|
|
|
|
|
Taymor Sliding Door Lockset, Series: Professional, Pocket, Suitable For Use With: 1-3/8 in Door Thickness, C26D Satin Chrome
|
Pull is flush with the edge of the door after installation. Easy grip handle. Manufactured of solid brass for maximum corrosion resistance.
|
Wide easy grip design. Mortise installation. Non handed. Latch engages and disengages by rotating round thumb turn. 1-3/8"W x 3-3/4"H.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners.
|
Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners.
|
Used on pre-drilled pocket doors. Latches but does not lock. Easy installation. Includes fasteners.
|
|